DTS3: 3-slot rugged Network Attached File Server
- REQUEST A QUOTE
- SWaP optimized form factor
- Network Attached Storage
- Ethernet recording and packet capture
- Net booting of clients with PXE protocol
- AES-256 encryption
- Block data storage with iSCSI
- Deployed network-centric systems
- Mobile data loader
- Remote embedded client boot
- Flight test instrumentation
The Compact Network Storage 2-Slot (CNS2) FIPS 140-2 is a conduction-cooled, rugged, NAS file server designed to be mounted in an ARINC tray on board mobile units in harsh environments. With the...
The Compact Network Storage 2-Slot (CNS2) with Type 1 is a rugged network file server (NFS) that supports industry-standard network storage protocols (NFS, CIFS, HTTP, and FTP) through two 1GbE...
The Compact Network Storage 4-slot (CNS4) is a conduction-cooled, high-performance network file server with scalable storage and encryption options. CNS4 is network-agile supporting CIFS, NFS,...
See all of our MAE Innovator Award Winning Products here The Data Transport System (DTS1) is a rugged Network Attached Storage (NAS) file server for use in Unmanned Aerial Vehicles (UAV), Unmanned...
The Removable Memory Cartridge (RMC) was specifically designed for use in deployed, rugged applications. Based around industry standard 2.5" SATA Solid State Drives (SSD), the RMC is scalable and...
The Data Transport System 3-slot (DTS3) is a rugged Network Attached Storage (NAS) file server for use in mobile vehicles, field ground stations, and aircraft. The DTS3 is easily integrated into Network Centric systems providing an easy-to-use, turn-key, rugged Network File Server. The DTS3 system houses three Removable Memory Cartridges (RMC) that provide quick off load of data. The RMC can be easily removed from one DTS3 and installed into any other DTS3 providing full transfer of data seamlessly between one or more networks in separate locations (e.g. ground-vehicle-ground).
Most modern vehicles, aircraft, and systems are built around a network-centric architecture. The backbone of such systems is Gigabit Ethernet (GbE) which operates at 1.2 5Gb/s. Some newer systems are committing to the even higher speed 10 GbE. Ethernet is ubiquitous with wide industry support including hardware and software.
With a network switch (or redundant switches) in the middle of the system, any network-enabled device can communicate with any other similar device. Network Attached Storage devices like the DTS3 allow any client to retrieve stored data or save new captured data. A NAS device provides SWaP advantages by negating the need for storage in each computer, display, or management device. These network clients can use the DTS3 to store sensor or maintenance data and to retrieve the latest mission and digital map data. These network devices can be different operating systems (Linux, VxWorks, Windows, etc) or CPU’s as long as they support industry standard protocols like NFS, CIFS, FTP, or HTTP.
This product is not subject to the USA International Traffic in Arms Regulations (ITAR) controls (US EAR export controls applies).
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.