KAD/ADC/008 Single-ended ADC
- REQUEST A QUOTE
- Three-Phase Power Line Monitor
- Three voltage and three current single-ended (S/E) input channels
- Measures 13 Parameters Per input channel:
- Maximum, minimum, average, RMS, amplitude current and voltage per channel
- Active, Apparent power and Power Factor per channel
- Voltage Period per Module
- Programmable input range (±1V, ±10V) for signals in the frequency range of 10 to 1000Hz
- Accuracy (0.3% FSR typical) for 10V range
- 16-bit simultaneous sampling on each channel
- Up to 20 samples per second per channel
- Three-phase power monitoring
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...
Single-ended ADC (programmable analog gain, three phase power monitor, 1 kHz b/w) - 6 channels at 20 sps
The KAD/ADC/008 is a monitor for 3-phase power lines. It measures 40 parameters associated with 3-phase power lines as follows:
- maximum, minimum, amplitude, root-mean-square and average (5x6 = 30 parameters)
- active, apparent power and their ratio (3x3 = 9 parameters)
- period of the VOLTAGE(0) = 1 parameter
The KAD/ADC/008 has a programmable gain amplifier and analog-to-digital converter and a 16,384-point conversion table for each of the six channels. All six channels are sampled simultaneously at 125 ksps.The algorithm waits for a positive-going-zero crossing on channel 0 and resets the maximum/minimum registers for each channel and the accumulators for the various averages. The algorithm ends on a positive-going-zero-crossing after at least 50 ms. The processing algorithm is a hard-wired state machine with no micro-code or forbidden states.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.