KAD/VID/106 H.264 Video Encoder
- REQUEST A QUOTE
- TEC-NOT-049 - Power estimation
- TEC-NOT-051 - Ethernet frames, Wireshark and FAT32
- TEC-NOT-067 - INEA and iNET-X packet payload formats
- TEC-NOT-016 - Power dissipation, an example
- Manual: DAS Studio 3 User Manual
- Environmental Qualifications Handbook
- KAM-500 Databook
- Aerospace Instrumentation Brochure
- H.264 compression of video input channels (NTSC or PAL)
- Supports digital video formats CIF, 2CIF, D1
- Configurable I-frame to P-frame ratio
- Programmable frame rates
- Advanced Audio Codec (AAC) audio encoding
- Constant compressed video bit-rate target can be set to between 250 kbps and 10 Mbps
- FIFO or Packetizer Operation
- Video monitoring of cockpit
- Video monitoring of control surfaces
- Direct monitoring of video compatible head/up and head/down displays
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
1 channel, H.264 video encoder from analog video input
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate is kept constant using multi-pass encoding and padding of the transport stream. Optional audio encoding produces a digital audio data stream. The left and right audio channels can be individually turned on or off. Selection of PAL or NTSC input format is a configurable setting.
The KAD/VID/106 latency is less than 80 ms. The latency measures the amount of time it takes to encode and transfer one video frame from the backplane interface of the module.
The KAD/VID/106 offers two generator lock outputs (CAM_2_GENLOCK_OUT and CAM_3_GENLOCK_OUT) to allow synchronization of all four video input signals.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.