AXN/ADC/405 - Differential ended ADC (5 kHz b/w) - 24 analog channels

  • Downloads
  • SPECIFICATIONS
  • SUPPORT
  • REQUEST A QUOTE

Features

  • 24 differential ended input channels
  • Ordering input range from ±100 mV to ±40V
  • High accuracy (0.01% FSR typical)
  • High input resistance (>1 MΩ) when on/off for /100M, /1V, and /10V variants
  • 16-bit simultaneous sampling with three configurable output streams on each channel
  • User defined linearization and compensation for errors in the entire measurement chain Applications

Applications

  • Differential voltage measurement
Flexible ADC Module

AXN/ADC/401 - Flexible ADC Module - 8 analog channels

The AXN/ADC/401 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential ended or single ended voltage measurement, AC coupled single...

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

AXN/CHS/16U - Axon chassis, 16 user-slots

AXN/CHS/16U - Axon chassis, 16 user-slots

The AXN/CHS/16U is a 16 user-slot Axon chassis, which along with the housing and backplane, includes an isolated 100W power supply for the controller and user-modules. A wide input operating...

ADC Power Monitor Module

AXN/ADC/408 - ADC 3-Phase Power Monitor Module - 6 analog channels

The AXN/ADC/408 is a monitor for 3-phase power lines that supports variable frequency power monitoring. It measures parameters associated with 3-phase power lines as follows: 13 steady state...

Axon backplane controller

AXN/BCU/401 - Axon backplane controller

The AXN/BCU/401 is a dual-port full-duplex, Gigabit Ethernet, Axon backplane controller, programmer and transmitter. It has a number of features including: In-built switch core...

CONTACT SALES/SUPPORT

We’d like to keep in touch and send you updates on our products, news and developments – please tick below to make sure you don’t miss out. You can unsubscribe at any time by clicking on the unsubscribe link at the bottom of the emails. Your personal information will not be shared with any person or organization outside of Curtiss-Wright. Review our privacy policy.


The AXN/ADC/405 is used to condition and digitize up to 24 analog differential ended channels. Single ended configurations are possible by enabling programmable pull-down resistors on any of the negative inputs.

At the heart of the AXN/ADC/405 is a hard-wired state-machine that oversamples all channels at a rate between 40 ksps and 80 ksps and digitally filters any noise above the user-programmable cutoff frequency. This is achieved using cascaded, 15-tap FIR filters with output rate decimation, followed by a final FIR or IIR filter. If IIR filtering mode is selected, the last digital filter in the filtering chain is an 8th or 16th order (selectable) Butterworth filter. If FIR mode is selected, the last digital filter in the filtering chain is a 49-tap Kaiser window, Beta 6 filter.

There are three independently configurable output streams per channel, allowing different sample rate, cutoff, and filter type to be selected for each output stream.

All signals are sampled simultaneously. When several channels are sampled at different sampling rates, at the start of an acquisition cycle all channels are aligned.

Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright
Sales

CONTACT SALES

Contact our sales team today to learn more about our products and services.

YOUR LOCATION

PRODUCT INFORMATION

Support

GET SUPPORT

Our support team can help answer your questions - contact us today.

REQUEST TYPE

SELECT BY

SELECT Topic