KAD/DAC/001 8-channel Digital Module
- REQUEST A QUOTE
- Eight single-ended (S/E) analog output channels (±10V)
- 0.25% (FSR) total error from all sources for analog output
- Lookup tables to map input parameter to analog output
- 16 S/E discrete output channel (Buffered TTL)
- Combinatorial logic can be used to map multiple parameters to a single discrete output
- Outputs are short-circuit protected (indefinite to ground)
- Output a voltage waveform based on backplane parameters, for example for a strip recorder
- Provide discrete outputs based on backplane parameters, for example memory status
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
8 channel analog outputs with 16-channel discrete outputs
The KAD/DAC/001 can be used to output up to eight single-ended waveforms, and provide up to 16 discrete output indications.
The module is able to take any parameter from the backplane and, using a user-defined lookup table, map that parameter to the output voltage range of the analog output channel. A different map can be used for each of the eight analog channels.
Each of the discrete outputs can be set to a logic high or low based on a combination of input words. The input words are passed through a user-defined mapping function, which produces a single bit output. A typical example would be a max-min. window function to determine if a parameter lies in a defined range.
The outputs from the mapping functions can be either logically ANDed or ORed together, and inverted if required, in order to control the discrete output.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.