KAD/ADC/111 48 channel Single-ended ADC
48 channel, Single ended Analog to digital converter (1kHz B/w). 48ch at 4Ksps
The KAD/ADC/111/10V/ET is used to condition and digitize up to 48 single-ended analog channels.
At the heart of the KAD/ADC/111/ET is a hard-wired state-machine that oversamples all channels at a rate between 16 ksps and 32 ksps and digitally filters any noise above the user-programmable cutoff frequency. This is achieved using cascaded, half-band, Finite-Impulse-Response (FIR) filters followed by an 8th order Butterworth Infinite-Impulse-Response (IIR) filter with a default cutoff point set at one quarter of the sampling frequency (fc = fs / 4).
All signals are sampled simultaneously. Therefore, when several channels are sampled at different sampling rates, at the start of an acquisition cycle, all channels are aligned.
- REQUEST A QUOTE
- 48 single ended input channels
- Ordering input range of ±10V or ±40V
- High accuracy (0.01% FSR typical for /10V variant and 0.05% for /40V variant)
- 16-bit simultaneous sampling on each channel
- Up to 4K samples per second per channel
- Up to 1kHz Bandwidth (AAAF filter)
- Analog signal acquisition
- FTI, OLM, HUMS
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.