KAD/BIT/101 Built-in Self Test module
The KAD/BIT/101 is a Continuous Built-In Test module (CBIT) which checks the Acra KAM-500 backplane to verify correct system operation.
The KAD/BIT/101 measures the precise value of the ±12V, ±7V and +5V power lines to ensure they are within specifications. Temperature sensors are located at the top block and the center of the module to allow the measurement of both the chassis top block temperature and the chassis internal temperature.
The KAD/BIT/101 checks that the current acquisition cycle is a valid format, measures the duration of each acquisition cycle and performs a checksum of all addresses transferred on the backplane to ensure the correct operation of the current format.
The KAD/BIT/101 module can be used to check both analog signal conditioning modules and bus monitor modules in a chassis. Channels on analog signal conditioning modules are checked that the signal stays within a minimum and maximum value. The KAD/BIT/101 can check the STATUS register from each bus monitor module in the chassis to indicate when an error occurs.
- REQUEST A QUOTE
- Provides up to 120 window functions (for example, limit checking)
- Up to 32 parameters can be sent to each window function
- Includes voltage and temperature monitors
- Monitors format running and address checksum
- Monitors status from MEM modules and bus monitors
- Counts number of power-ons and total time powered on
- 4 x 3 types of STATUS output (TTL, LED and ‘Dolls eye’)
- Selected errors stored in First In First Out (FIFO) with optional time tag
- Selected errors transmitted via RS-422
- System monitoring
The KAM/BIT/102 is a Continuous Built-In Test (CBIT) module which checks the Acra KAM-500 backplane and user-modules to verify correct system operation. The KAM/BIT/102 measures the precise value...
KAD/ADC/136 Flexible ADC (full/½-bridge, ICP, PT100, thermocouple, FIR/IIR, 12.5 kHz b/w) - 8 channels at 50 ksps
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
KAD/ADC/135 Full/½-bridge ADC (voltage/current excitation, programmable analog gain, FIR/IIR, 6.25 kHz b/w) - 12 channels at 25 ksps
The KAD/ADC/135 is used to condition and digitize up to 12 differential-ended analog channels. At the heart of the KAD/ADC/135 is a hard-wired state-machine that oversamples all channels at a rate...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.