KAD/SWI/107 Ethernet tap module 4-port
The KAD/SWI/107 is an Ethernet tap module designed for operating in harsh environments. All connections use copper cabling, minimum specification CAT5.
Two individual ports of the KAD/SWI/107, which together implement a tap on the Ethernet link, are referred to as a tap port pair. One of these ports is referred to as the tap port; the other port is referred to as the paired tap port. The tap port pair may be configured as 10BASE-T or 100BASE-TX and connect to the external Ethernet network. The pair of aggregator/monitor ports can only be 100BASE-TX and connect directly to an Ethernet sink device such as a NET/REC/001 or a KAD/EBM/101.
The KAD/SWI/107 provides an active non-intrusive mechanism to monitor the traffic on an external network. Traffic received on each of the tap ports is forwarded to both of the aggregator/monitor ports and the paired tap port. The traffic forwarded to both the aggregator/monitor ports is identical, which allows for the data to be simultaneously recorded, analyzed, displayed, and parsed. Traffic received on the aggregator/monitor ports is not forwarded to the tap port pair.
There is a network activity register for each tap port that counts the number of packets received through each port and the packets forwarded through the other three ports during a one-second interval. Both registers can be read over the backplane.
- REQUEST A QUOTE
- Four Ethernet ports configured as two tap ports (ingress) and two aggregator/monitor ports (egress)
- The tap port pair can be configured as either 10BASE-T or 100BASE-TX; the aggregator/monitor ports can only be configured as 100BASE-TX
- Ethernet traffic is forwarded between the ports of the tap port pair using a straight-through connection and a copy is forwarded to both of the aggregator/monitor ports
- No traffic from either of the aggregator/monitor ports is forwarded to the tap ports
- Store-and-forward operation for aggregation of tap traffic to monitor ports
- Industrial temperature operation (-40 to +85°C)
- Live at power-up (static internal routing; no MAC address learning time delays)
- Airborne network tap to aggregate data from an external aircraft 10/100BASE-TX Ethernet network
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
KAD/ADC/136 Flexible ADC (full/½-bridge, ICP, PT100, thermocouple, FIR/IIR, 12.5 kHz b/w) - 8 channels at 50 ksps
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
KAD/ADC/135 Full/½-bridge ADC (voltage/current excitation, programmable analog gain, FIR/IIR, 6.25 kHz b/w) - 12ch at 25 ksps
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.