KAD/VDC/001 Differential-ended voice-to-digital converter (CVSD)
2 channel, Differential ended voice-to-digital converter (CVSD) - 2ch at 64kbps
The KAD/VDC/001 is a dual audio-to-digital converter module.
At the core of the module is a delta-modulator where the delta size depends on the rate of change. This is referred to as Continuously Variable Slope Delta (CVSD) modulation. This delta-modulator outputs a serial stream to a serial-to-parallel converter, the output of which is regularly read over the backplane. For a detailed description of this type of audio encoding, refer to the IRIG-106 standard, Chapter 5.
A tone output is also available that can be connected to a channel, for link indication or calibration/verification.
- REQUEST A QUOTE
- Two differential-ended audio input channels
- Programmable sampling rates (8 kbps to 64 kbps)
- Fully IRIG-106 Chapter 5 compatible
- 500 Hz tone output for link indication or calibration/verification
- Programmable word length, for example 16 bits @ 32 kbps = 2 k words per second
- Cockpit voice monitoring
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.