GTS/BSC/004 Smart Source Selector PCI board (20 Mbps) - 2 channels
- REQUEST A QUOTE
- Bit synchronizer
- Bit error rate performance within 1 dB of theory
- Programmable loop bandwidth (0.01 to 2.0%)
- Bit-rates up to 2 0Mbps (NRZ-L codes)
- Smart Source Selector
- Aligns over 350 bits
- Moving match window of 64 bits
- Uses signal quality estimates to weigh input signals
- Yields performance gain of up to 3 dB when all channels are used
- Real-time ground stations
- Telemetry data links
The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
The GTS/BSC/004 reconstructs a serial PCM data stream from a source that has been corrupted by noise, phase jitter, amplitude modulation, or base line variations. The all-digital design utilizes two independent, programmable matched filters and Phase Locked Loops (PLL) to track deviations in the bit-rate of the received signals. The output from the bit synchronizers is fed into the Smart Source Selector thereby producing a hard decision (1 or 0) based on the signal quality of the received bits. If the soft values are shifted in time, data is re-aligned prior to combining the soft values.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.