XMC-554C 2TB NAND SATA Drive
- REQUEST A QUOTE
- Up to 2 TB total capacity
- NAND flash (MLC and SLC)
- ECC, wear leveling and bad block management
- Boot drive support
- SMART attributes supported
- TRIM Support
- Windows, Linux, and VxWorks support
- PCI Express (PCIe) 2x Gen2
- Conduction-cooled Level 200
- Low power
- Write protect
- Data recording
- Video recording
- Mission data and map storage
- Database and data logging
“This product has reached end of life. For a similar NXP Power Architecture-based 6U module, we recommend looking at the VPX6-197. Or, browse our full selection of processor cards.” The...
Our VPX6-195 6U OpenVPX T2080 Single Board Computer (SBC) combines performance with the advanced I/O capabilities of the NXP's quad-core AltiVec enabled T2080 processor. Designed for...
Using one or two NXP (formerly Freescale) MPC7447A/7448 Power Architecture processors with AltiVec technology, and up to 1 GB of DDR1 SDRAM, the VME-183 Single Board Computer provides an ideal...
The SVME/DMV-184 combines the performance and I/O capabilities of the MPC8640 processor with an extensive I/O complement, resulting in a highly capable processing platform for a wide range of...
The VME-186 VME Single Board Computer is based on NXP's high-performance QorIQ P4080 SOC multi-core processor. With four or eight Power Architecture cores running up to 1.5 GHz, and up to 8 GB of...
The XMC-554C is a rugged, high performance, reliable and power-efficient NAND flash solid state drive (SSD) solution. The XMC-554C does not have any moving parts, providing significantly lower power consumption and an order of magnitude improvement in reliability in environments with vibration and contaminants, compared to traditional rotating hard disk drives (HDD). Also important is the clear performance advantage, due to the lower latency and higher data transfer rates. This translates to enormous benefits in regular operating conditions and more critically, in high-risk combat environments.
The XMC-554C provides two independent mSATA interfaces, one per “drive” providing up to 2 TB of MLC NAND flash.
Industry standard NAND flash error correcting code (ECC) is supported, as well as wear leveling and bad block management. The wear leveling algorithm spreads the program/erase cycles evenly across the media, including the over provisioning sectors, avoiding premature device failure due to frequent data overwrites on the same data. The XMC-554C tracks the write/erase history of each flash block and will immediately retire blocks if the block fails during an erase or program operation, or if the wear cycle count exceeds the rated cycle count of the flash device.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.