An important characteristic of an electronic control system that must be given careful attention is Signal Integrity. The signal becomes more susceptible to attenuation due to ringing, crosstalk, ground bounce, distortion, signal loss, and power supply noise as the bit rates become more extreme. It is important to mitigate these effects on all levels of electronic design including: electronic packaging, internal connections of integrated circuitry, through the chassis design, the Printed Circuit Boards (PCB), the backplane, and connections between different sub-systems. Curtiss-Wright has over two decades of experience in high performance backplane design and simulation; having performed Signal Integrity analysis and design for numerous application-specific switch fabric backplane designs. Our personnel has experience in performing full 3D modeling and simulation of interconnects at frequencies up to 20 GHz.
Curtiss-Wright has developed an advanced signal integrity analysis methodology and post-processing to ensure quality design of our electronic systems, able to support Gen3 data rates. Much of our analysis is based on the IEEE 802.3-2008 including:
Along with other design considerations such as:
These types of design considerations extensive studies have been performed on Gen3 signaling on VPX backplanes. In addition, VITA 68 VPX Compliance Channel draft is consistent with our analysis methodology; which is applied to define channel characteristics for multiple fabric types. As we continue to optimize our control system design to be consistent with Gen3 requirements, significant investment has been made by Curtiss-Wright in the analysis and testing to ensure Gen3 performance.
We have the industry's leading signal integrity analysis tools:
A few important characteristics to look at during the design phase are:
Key Design Milestones
Through internal testing and modeling research, Curtiss-Wright has been able to achieve robust solutions in Gen3 signaling in Open VPX systems greater then 10GBaud. Our partner's Fabric40 backplanes incorporate patent-pending optimizations to deliver the very best performance, and these design optimizations are being migrated to our wide range of Fabric 40 payload modules, including SBCs, DSPs, FPGAs, and switches. It really comes down to a commitment to high level signal integrity engineering. Curtiss-Wright has the capability to meet and exceed the requirements of Gen3 signaling due to our comprehensive analysis and experience.
Modern day high performance systems require world class signal integrity capabilities. Many of today’s standard switched fabrics are operating at 5 Gbaud to 6.25 Gbaud, with leading edge products such as Curtiss-Wright’s Fabric40 products operating at >10 Gbaud. Examples of these higher speeds are: Gen3 PCIe at 8 Gbaud, InfiniBand QDR at 10 Gbaud, and Ethernet 40GBase-KR4 at 10.3 Gbaud. We have performed signal integrity simulation studies for standard groups in developing several standard backplanes. In applications ranging from PICMG 2.16 to VXS, VPX, or custom backplanes, Curtiss-Wright is the vendor of choice for high-speed backplane signaling.