Electronic Warfare System - Leonardo DRS Tuner

  • Downloads
  • SPECIFICATIONS
  • SUPPORT
  • REQUEST A QUOTE

Key Features

  • SWaP-optimized signal processor
  • 4 x High-performance tuner channels
    • 2 MHz to 6 GHz
    • 100 μsecs tuning speed
    • 100 MHz IF passband
  • Intel Xeon D Octal Core DSP Processors
    • 410 GFLOPs with AVX2
  • Xilinx Kintex-7 325T FPGA Processor
    • User Programmable with LVDS I/O
  • High bandwidth I/O options
    • 10 and 1 Gigabit Ethernet, USB
  • MIL-STD-810/MIL-STD-461 qualified

Applications

  • Signal Intelligence
  • Electronic Warfare
  • Electronic Support

Products included in the system:

  • MPMC-9323 Chassis Enclosure
  • SI-9172 Multi-Channel Tuner/Exciter
  • VPX3-482 CHAMP-XD1 DSP
  • XF07-523 Xilinx Kintex-7 FPGA Processor
  • Power Supply
  • XMC-651 Ethernet Switch (option)
  • XMC-554 SSD Flash Memory (option)
Electronic Warfare

Electronic Warfare System - Silver Palm Tuner

Electronic Warfare (EW) platforms face an increasingly difficult task in terms of RF channel density and signal evasiveness. Curtiss-Wright and Silver Palm Technologies have collaborated to develop...

Software Defined Radio (SDR) and Electronic Warfare (EW) Systems

Software Defined Radio and Electronic Warfare System

By using a commercial off-the-shelf (COTS)-based mission management system as a starting point, you can significantly speed up the development of a high performance Software Defined Radio (SDR) and...

3U VPX Intel Xeon D DSP

CHAMP-XD1 Digital Signal Processor

Facing increasing SWaP-C demands and harsh environments, today’s industrial, aerospace & defense systems need to be smaller but more powerful, and ultimately more cost-effective. COTS...

XMC FPGA

XF07-523 FPGA Digital IO XMC

The XF07-523 is a rugged Kintex-7 FPGA based XMC with digital IO. The combination of direct high-speed I/O ports and FPGA processing makes the XF07-523 ideal for demanding applications including...

P/XMC-651 Rugged Ethernet Mezzanine Switch

P/XMC-651 Rugged Ethernet Mezzanine Switch

The XMC/PMC-651 is a 12-port Gigabit Ethernet switch packaged in the industry-standard XMC form factor. It is designed to support "in-chassis" networks with managed Layer-2 switching capabilities....

XMC-554C 2TB NAND SATA Drive

XMC-554C 2TB NAND SATA Drive

The XMC-554C is a rugged, high performance, reliable and power-efficient NAND flash solid state drive (SSD) solution. The XMC-554C does not have any moving parts, providing significantly lower...

CONTACT SALES/SUPPORT

We’d like to keep in touch and send you updates on our products, news and developments – please tick below to make sure you don’t miss out. You can unsubscribe at any time by clicking on the unsubscribe link at the bottom of the emails. Your personal information will not be shared with any person or organization outside of Curtiss-Wright. Review our privacy policy.


3U VPX Multi-Channel Receiver System with Leonardo DRS Tuner

Electronic Warfare (EW) platforms face an increasingly challenging task in terms of RF channel density and signal evasiveness. That's why Curtiss-Wright and Leonardo DRS have collaborated on a range of rugged open architecture RF signal processing systems.

The rugged EW system is a compact solution to today’s RF challenges. It provides multiple receiver channels with independent or phase coherent tuning and supports frequency extensions to 18 GHz and an optional exciter channel exciter channel covering 2 MHz to 6 GHz. The RF tuner provides the bandwidth, dynamic range with low noise, processing, and configurability required for today’s EW applications.

That means this solution can deliver performance in hostile RF environments that was not possible previously in much larger systems.

The Curtiss-Wright EW multi-channel tuner system is a ruggedized compact 3U VPX system that combines state-of-the-art multi-channel receivers, Intel Xeon D multi-core DSPs, and Xilinx FPGAs. The Leonardo DRS SI-9172 Vesper tuner/exciter card provides four high-performance configurable tuner channels. The Intel Xeon D octal-core (12-core optional) CHAMP-XD1 DSP processor card provides the EW signal processing and system control. Signal processing in the system is augmented by the XF07-523 XMC that provides a user programmable Xilinx Kintex-7 FPGA with direct connection to the SI-9172 tuner.

Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright
Sales

CONTACT SALES

Contact our sales team today to learn more about our products and services.

YOUR LOCATION

PRODUCT INFORMATION

Support

GET SUPPORT

Our support team can help answer your questions - contact us today.

REQUEST TYPE

SELECT BY

SELECT Topic