Curtiss-Wright Defense Solutions

KAD/ADC/136 8 channel Flexible ADC

Downloads
SPECIFICATIONS
RELATED PRODUCTS
SUPPORT
REQUEST A QUOTE

Product Downloads

KAD/ADC/136 Product Sheet

Featured Downloads

Features

Eight flexible channels that can be used for full or half-bridge, potentiometer, single ended, differential ended, Integrated Circuit Piezoelectric (ICP), Resistance Temperature Detectors (RTD, for example PT100) or thermocouples
Simultaneous sampling 16-bit A/D for each channel
High accuracy (up to 0.02% Full Scale Range [FSR] typical)
Programmable primary gain per channel (1, 2, 4… 256)
Programmable input range per channel (up to ±10V)
Programmable balance current per channel
Programmable classic shunt per channel (100kΩ)
Programmable current or voltage excitation per channel
Short-to-ground on any channel does not affect others
Completion resistors for ½-bridge configuration
Two independently configurable output streams per channel
15-tap Finite Input Response (FIR) Kaiser window or 8th
order Butterworth Infinite Impulse Response (IIR) filter
configurable per each channel output stream
Up to 50K samples per second per channel
Up to 12.5kHz bandwidth

Applications

Analog signal Acquisition
Differential Ended
SE
Full Bridge
Half Bridge
Potentiometer
RTD
ICP
Accelerometer

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

KAD/ADC/109/S1 Full-bridge ADC

The KAD/ADC/109/S1 provides independent excitation for up to eight channels. Each channel has a separate programmable amplifier, programmable filter and A/D converter. At the heart of the...

KAD/ADC/135 12 channel Full/½-bridge ADC

The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...

KAD/MAT/101 Microcontroller-based module

The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...

Acra KAM-500 chassis - 13 user-slots (extended temperature)

KAM/CHS/13U Acra KAM-500 chassis - 13 Slots

The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...

CONTACT SALES/SUPPORT

8 channel, Flexible ADC (full/½-bridge, ICP, PT100,thermocouple, FIR/IIR, 12.5kHz b/w) - 8ch at 50ksps

The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD sensor, thermocouple, full-bridge, half-bridge, or potentiometer mode.

The KAD/ADC/136 provides programmable current or voltage excitation per channel up to 10.2V and 30mA. For each thermocouple channel, it is necessary to select the Junction Compensation Channel setting. Internally, the KAD/ADC/136 performs linearization for RTD and thermocouple modes.

At the heart of the KAD/ADC/136 is a hard-wired state-machine that oversamples all channels at a rate between 100 ksps and 200 ksps and digitally filters any noise above the user-programmable cutoff frequency. This is achieved using cascaded, half-band FIR filters. If IIR filtering mode is selected, the last digital filter in the filtering chain is an 8th order Butterworth IIR filter. There are two independently configurable output streams per channel, allowing different sample rate, cutoff, and filter type to be selected for each output stream. All signals are sampled simultaneously. When several channels are sampled at different sampling rates, at the start of an acquisition cycle all channels are aligned.

Download Product Sheet register now Request Quote