KAD/UAR/102 4 channel Universal Asynchronous Parser
- REQUEST A QUOTE
- Monitors up to four RS-422/485/232 busses
- Coherently parses traffic and tags for up to 125 messages from 4 to 512 bytes
- 2K words deep per channel (snarfer)
- Bit-rates from 300bps to 1,000,000bps
- 7/8 bits per word with odd, even or no parity
- Programmable start sequence (1 to 8 bytes), stop sequence (1 byte or by fixed length) and idle time
- Receiving data from GPS module or onboard computer
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
4 channel, RS-232/RS-422/RS-485 universal asynchronous parser and snarfer
The KAD/UAR/102 is used to parse (coherently extract specific bytes) and snarf (send all data to a FIFO) up to four RS-232/422/485 channels. The module is able to parse and snarf each channel at the same time.
The signal type (RS-232/422/485), bits per word and parity are programmable on a channel-by-channel basis. The bit-rates must be binary multiples of each other.
In the parser, a total of up to 126 complete messages are triple buffered so that the stale indication is message-wide. Each message can be up to 512 characters (bytes) long (including start and stop characters). Each message is tagged to 0.1 ms resolution; a message is considered found when up to eight specific bytes are received.
The end of message byte is determined by a user-defined stop character or specific number of words. A message is not updated if any sequence is incorrect.
The snarfer stores all data from each bus in a separate FIFO 2K words deep.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.