KAD/BCU/143 Ethernet Backplane Controller
- Downloads
- SPECIFICATIONS
- SUPPORT
- REQUEST A QUOTE
Product Downloads
Key Features
- Single 100BaseTX Ethernet channel
- User assigned IP address
- Responds to ARP and PING messages
- Programs and verifies Acra KAM-500 hardware using TFTP protocol
- Synchronization with a network time source using SNTPv4; unicast, broadcast, and manycast without authentication
- Jumbo packet support, up to 64Kbyte
- IENA and iNET-X compatible packetization structures
- Supports aperiodic transmission
Applications
- Ethernet based data acquisition systems
KAD/BCU/101 IRIG-106 Backplane Controller and Encoder
The KAD/BCU/101 functions as two modules in one; an encoder and a backplane controller. The encoder is functionally identical to the KAD/ENC/005 and encodes data from any Acra KAM-500 module in an...
KAD/BCU/140 Ethernet Backplane Controller
The KAD/BCU/140 is a full-duplex, Ethernet, Acra KAM-500 backplane controller packet programmer and an IPv4 data packets transmitter (via a 100BaseTX link interface). The Acra KAM-500 backplane...
AXN/BCU/401 - Axon backplane controller
The AXN/BCU/401 is a dual-port full-duplex, Gigabit Ethernet, Axon backplane controller, programmer and transmitter. It has a number of features including: In-built switch core...
DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
IADS RTStation
IADS-RTSTATION is a complete real-time and post-test display and analysis software suite and is scalable from a laptop to a large workgroup through its client/server software architecture....
KAM/CHS/13U Acra KAM-500 chassis - 13 Slots
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
NET/REC/001 Ethernet Network Recorder (CompactFlash)
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
NET/SWI/101 Gigabit Ethernet Switch
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...
The KAD/BCU/143 is a full-duplex, Ethernet, Acra KAM-500 backplane controller and an IPv4 packet generator (with a link speed of 100BaseTX).
The Acra KAM-500 backplane controller supports chassis programming via Ethernet using the Internet Engineering Task Force (IETF) TFTP (as defined in IETF RFC 1350 The TFTP Protocol). Synchronization with an external time master is achieved with an external SNTPv4 server (IETF RFC 5905 Network Time Protocol: Protocol and Algorithms Specification).
The KAD/BCU/143 supports the Simple Network Management Protocol version 2c (SNMPv2c) that can be used to query and discover configuration of the chassis.
Upon receipt of a programming packet, the module switches to program/verify mode, where it can read or write data blocks to or from any module within an Acra KAM-500 chassis.
In acquisition mode, some or all acquired data is transferred from the backplane to the onboard CVT. Onboard, it is packetized into either an IENA or an iNET-X application layer packet and then transmitted. For asynchronous bus data, the KAD/BCU/143 supports aperiodic transmission, whereby a packet is not generated if no fresh data has been acquired from a packetizer user-module.
Download Product Sheet register now
Product Finder
CONTACT SALES
Contact our sales team today to learn more about our products and services.
GET SUPPORT
Our support team can help answer your questions - contact us today.