Curtiss-Wright Defense Solutions

KAM/BIT/101 Continuous Built-in Self Test module (CBIT)

Downloads
SPECIFICATIONS
RELATED PRODUCTS
SUPPORT
REQUEST A QUOTE

Product Downloads

KAM/BIT/101 Continuous Built-In Test Module Product Sheet

Featured Downloads

Features

Provide up to 120 window functions (limit checking); up to 32 parameters can be sent to each window function
Monitors voltage, temperature, format running and address checksum
Counts number of power-ons and total time powered on
4 x 3 types of status output (TTL, LED and doll’s eyes)
Selected errors transmitted in First In First Out (FIFO) with optional time tagging and via RS-422

Applications

System monitoring

Acra KAM-500 chassis - 13 user-slots (extended temperature)

KAM/CHS/13U Acra KAM-500 chassis - 13 Slots

The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

NET/SWI/101 Gigabit Ethernet Switch

The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...

NET/REC/001 Ethernet Network Recorder (CompactFlash)

The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...

CONTACT SALES/SUPPORT

The KAM/BIT/101 is a Continuous Built-In Test module (CBIT) which checks the Acra KAM-500 backplane to verify correct system operation.

The KAM/BIT/101 measures the precise value of the ±12V, ±7V, and +5V power lines to ensure they are within specifications. Temperature sensors are located at the top block and the center of the module to allow the measurement of both the chassis top block temperature and the chassis internal temperature.

The KAM/BIT/101 checks that the current acquisition cycle is a valid format, measures the duration of each acquisition cycle, and performs a checksum of all addresses transferred on the backplane to ensure the correct operation of the current format.

The KAM/BIT/101 can be used to check both analog signal conditioning modules and bus monitor modules in a chassis. Channels on analog signal conditioning modules are checked to confirm that the signal stays within a minimum and maximum value. The KAM/BIT/101 can check the status register from each bus monitor module in the chassis to indicate when an error occurs.

Download Product Sheet register now Request Quote