Curtiss-Wright Defense Solutions

KAD/ETH/101 Ethernet Transmission and Programming Module

Downloads
SPECIFICATIONS
RELATED PRODUCTS
SUPPORT
REQUEST A QUOTE

Product Downloads

KAD/ETH/101 Product Sheet

Featured Downloads

Features

Bi-directional, full-duplex, fast Ethernet (100BaseTx) connection
Fixed user-assigned Internet Protocol (IP) address
Two separately buffered Ethernet outputs
UDP support for packets up to 64kbyte (32ksamples) via IP fragmentation
Current Value Table (CVT) of up to 1Msample
IP version 4 (IPv4) and IENA protocols supported

Applications

Ethernet based data acquisition systems

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

KAD/BCU/101 IRIG-106 Backplane Controller and Encoder

The KAD/BCU/101 functions as two modules in one; an encoder and a backplane controller. The encoder is functionally identical to the KAD/ENC/005 and encodes data from any Acra KAM-500 module in an...

KAD/ETH/102 Ethernet transmission and programming interface module (iNET-X compatible)

KAD/ETH/102 Ethernet Transmission and Programming Module

The KAD/ETH/102 is a full-duplex, Fast Ethernet (100 Mbps) module that can be used to program an Acra KAM-500 system or transmit data from an Acra KAM-500 system. In acquisition mode, some or all...

KAD/SWI/108 Ethernet switch (Xbar)

The KAD/SWI/108 is an Ethernet switch designed for operating in harsh environments. The KAD/SWI/108 has a store-and-forward Xbar switching fabric that is configured via a static forwarding table...

NET/REC/001 Ethernet Network Recorder (CompactFlash)

The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...

NET/SWI/101 Gigabit Ethernet Switch

The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...

CONTACT SALES/SUPPORT

Ethernet transmission and programming interface module (IENA compatible)

The KAD/ETH/101 is a full-duplex, fast Ethernet (100 Mbps) module that can be used to program an Acra KAM-500 system or transmit data from an Acra KAM-500 system. In acquisition mode, some or all acquired data is transferred from the backplane to the onboard CVT. Onboard it is packetized into a user-defined structure. Once full, the packet is transmitted via UDP.

Any number of user-defined packet structures can be handled simultaneously. Different packet identifiers, packet sizes and destination IP addresses can be individually programmed for each packet type. Destination IP addresses can be unicast, multicast or broadcast. Upon reception of a programming packet, the module immediately exits acquisition mode and switches to program/verify mode. In program/verify mode it can read or write data blocks to or from any module in any chassis within a distributed Acra KAM-500 system. The KAD/ETH/101 supports IPv4 networks with fixed IP address allocation, including user-assignment of the module's own IP address. The module is factory-programmed with a unique Ethernet MAC address.

Download Product Sheet register now Request Quote