The KAD/ARI/103 is an ARINC-717 bus monitor that supports parsing of an ARINC-717 (DFDR) bus on a major frame level, with built-in error detection on a single module. ARINC-717 is backwards compatible with ARINC-573, therefore ARINC-573 is also supported.
In the discussion below, traffic refers to words on the bus and tag refers to associated information such as info words. The parser triple buffers up to 4096 12-bit words (4 sub-frames) and their associated tags as a frame. The status word that is buffered with each major frame indicates whether the frame has been read before (stale) or whether the message was overwritten before it was read (skipped), or whether the message has never been received (empty).
A valid frame is detected when all four sub frame sync words are received, each followed by 63, 127, 255, 511, or 1023 data words.
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system.
The NET/REC/001 can be configured via...
The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...